Payment & Shipping Terms:
|Name:||Hydraulic Proportional Control Valve||Advantage:||No Noise|
|Motor Type:||Two-way Synchronous Motor With Magnetic Clutch||Motor Pressure:||24VAC,50/60HZ 5.5VA|
|Torque:||600 Newtons||The Whole Time:||About 240s|
|Control Signal:||24VAC||Feedback Signal:||None|
proportional flow control valve,
electronically controlled proportional valves
No Noise Hydraulic Proportional Control Valve With Hysteresis Clutch Protection
Hydraulic Proportional Control Valve Application
Hydraulic Proportional Control Valve are straight-stroke drives that can be used with the BL-VG7000 series valve body to achieve media flow regulation in the pipeline. Widely used in air conditioning, heating systems, etc., can also be used with other valves through different connectors.
Hydraulic Proportional Control Valve Description
BL-VA7150: Floating point type, built-in 24VAC bidirectional reversible motor, accepting switch type control signals, providing incremental control.
BL-VA3000: Floating point type, built-in 24VAC bidirectional reversible motor, accepting switch type control signals, providing incremental control.
Hydraulic Proportional Control Valve Characteristics
◆ Small travel limit switch is adopted.
◆ Flame retardant ABS engineering plastic cover.
◆ Valve position indicator.
◆ Suitable for straight stroke control valves up to 20mm.
◆No noise, large output torque.
◆ Easy installation on site.
Proportional Control Valve Intelligent debugging instructions
◆ Long press “Key 1”, “LED1” light is on, press “Key 1” again, “LED1” light will flash once and it will enter the automatic calibration procedure;
◆ Long press “Key 2” to switch between forward and reverse. The "LED2" light is on for a positive transition, and the "LED2" light is off-reverse;
◆ Press and hold “Key 3” to switch the voltage and current input. The "LED3" light is on the 0-10V voltage, and the "LED3" light is off at 4-20mA;
◆The driver and valve body have been connected into one factory product. The user does not need to perform the stroke calibration. The driver and the valve body have been disassembled. The wiring must be calibrated to ensure that the valve operates accurately according to the given signal.
◆Note: Analog intelligent and digital models cannot be used at the same time, that is, when connected to analog intelligent type, 3-4 and 2-4 cannot be connected to AC24V. In the connection type, 4-5 cannot be connected to AC24V.
Hydraulic Proportional Control Valve Technical specifications
|Action/Control||Reversible, incremental control|
|Motor type||Two-way synchronous motor with magnetic clutch|
|Motor pressure||24VAC,50/60HZ 5.5VA|
|Torque||600 Newtons||1200 Newtons|
|Material||Reducer bracket: galvanized steel bracket: Die-cast aluminum alloy Housing: flame retardant ABS engineering plastic IP40|
|Ambient temperature||Operation: 1 ° C to +55 ° C; Storage: -20 to 65 ° C, relative humidity ≤ 90% without condensation.|
|The whole time||About 240s||About 90s|
|Accessories||Lock nut, scale ruler, scale indicator, manual|
|Control method||Switch type|
Contact Person: Ms. karen