Payment & Shipping Terms:
|Name:||Pneumatic Proportional Control Valve||Action/Control:||Reversible, Incremental Control|
|Motor Type:||2 Way||Cover:||ABS Engineering Plastic Cover|
|Torque:||600 Newtons||The Whole Time:||About 240s|
|Control Signal:||24VAC||Feedback Signal:||None|
proportional relief valve,
electronically controlled proportional valves
2 Way Pneumatic Proportional Control Valve With ABS Engineering Plastic Cover
Pneumatic Proportional Control Valve Model Description
BL-VA7150: Floating point type, built-in 24VAC bidirectional reversible motor, accepting switch type control signals, providing incremental control.
BL-VA3000: Floating point type, built-in 24VAC bidirectional reversible motor, accepting switch type control signals, providing incremental control.
BL-VA3100: Floating point type, built-in 220VAC bidirectional reversible motor, accepting switch type control signals, providing incremental control.
BL-VA3102: Intelligent, can accept and feedback 0-10V or 4-20mA control signals, providing proportional control.
Pneumatic Proportional Control Valve Characteristics
◆Synchronous reversible motor with low AC voltage, with hysteresis clutch protection.
◆With manual operation mechanism, it can be manually switched and debugged under abnormal conditions.
◆With timed shutdown function and software double protection function.
◆ Small travel limit switch is adopted.
◆ Flame retardant ABS engineering plastic cover.
◆ Valve position indicator.
Pneumatic Proportional Control Valve Electrical wiring diagram
Proportional Control Valve Intelligent debugging instructions
◆ Long press “Key 1”, “LED1” light is on, press “Key 1” again, “LED1” light will flash once and it will enter the automatic calibration procedure;
◆ Long press “Key 2” to switch between forward and reverse. The "LED2" light is on for a positive transition, and the "LED2" light is off-reverse;
◆ Press and hold “Key 3” to switch the voltage and current input. The "LED3" light is on the 0-10V voltage, and the "LED3" light is off at 4-20mA;
◆The driver and valve body have been connected into one factory product. The user does not need to perform the stroke calibration. The driver and the valve body have been disassembled. The wiring must be calibrated to ensure that the valve operates accurately according to the given signal.
◆Note: Analog intelligent and digital models cannot be used at the same time, that is, when connected to analog intelligent type, 3-4 and 2-4 cannot be connected to AC24V. In the connection type, 4-5 cannot be connected to AC24V.
Pneumatic Proportional Control Valve Technical specifications
|Action/Control||Reversible, incremental control||Proportional control forward or reverse|
|Motor type||Two-way synchronous motor with magnetic clutch|
|Motor pressure||24VAC,50/60HZ 5.5VA||220V||24VAC, 50/60HZ 5.5VA|
|Torque||600 Newtons||1200 Newtons||1200 Newtons|
|Material||Reducer bracket: galvanized steel bracket: Die-cast aluminum alloy Housing: flame retardant ABS engineering plastic IP40|
|Ambient temperature||Operation: 1 ° C to +55 ° C; Storage: -20 to 65 ° C, relative humidity ≤ 90% without condensation.|
|The whole time||About 240s||About 90s||About 90s||About 90s|
|Accessories||Lock nut, scale ruler, scale indicator, manual|
|Control signal||24VAC||24VAC||220VAC||DC 0-10 Or 4-20mA|
|Feedback signal||None||DC 0-10V Or 4-20mA|
|Control method||Switch type||Intelligent type|
Contact Person: Ms. karen